Personal Alerts Message
A Typical Example

1/22/2010

Hit Counter

 

Beginning of Alerts Message

Recent Journal Articles and US Patents

US Patent Applications

World Patents

Back to Personal Alerts Description

 

These Alerts messages are sent weekly and are on specific topics selected by the subscriber.  Maro must agree to the Topics as being reasonable. 

For example; all polymer articles and patents or all materials articles and patents would be too broad to be effective. Reviewing a hundred links is reasonable, but reviewing a thousand or more links is not only tedious but unreasonable for today's busy professional. 

On the other end of spectrum, LLDPE foams would be too restrictive, yielding few if any hits during a week or even a month. 

Subscribers are urged to be more general than very specific.  For example foams would be better than polyethylene foams.  Sometimes something about liquid crystal foams might be very interesting to one working with polyethylene foams and, could even lead to a break-through.  

This service is based on the notion that broad awareness is important in professional practice.

Subscriber XXXX

Polyethylene

Articles
Patents
Journals
World Patents
US Patent Applications

Maro Personal Alerts 1/21/2009

#171 (from 12/15/2006).

These Topics can be changed by a simple reply. They will take effect for the next Alerts message.

Roger D. Corneliussen
Editor
Maro Polymer Links
327 Huffman Drive

Exton, PA 19341

Tel: 610 363 9920
Fax: 610 363 9921
E-Mail:
cornelrd@bee.net
Website: www.maropolymeronline.com
Website:
http://www.nanotechnology-profit.com/index.html

Note:  The date for patents is the date of publication and date for articles is the date of Maro collection.

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Recent Journal Article and US Patents

Polyethylene

Blends

12/8/2009

7,629,404
Thermoplastic polyolefin composition

12/4/2009

Preparation, structural development, and mechanical properties of microfibrillar composite materials based on polyethylene/polyamide 6 oriented blends 
(p 2918-2932) Journal of Applied Polymer  Science 115 #5 (2010)
Abstract

11/27/2009

Low Temperature Izod Impact Studies of Blends Based on Impact Grade Polypropylene and Ethylene-{alpha}-Octene Copolymer  
(2879-2888) Journal of Reinforced Plastics and Composites 28 #23 (2009)
[Abstract]

Copolymers

12/15/2009

7,632,573
Polymers of ethylene and, optionally, copolymerizable esters, films using such polymers and stretch hood packaging processes using such films

12/4/2009

Novel Copolymers of Trisubstituted Ethylenes and Styrene. 6. Trialkoxy Ring-Substituted Ethyl 2-Cyano-1-oxo-3-phenyl-2-propenylcarbamates
(1 – 5)  Journal of Macromolecular Science Part A - Pure and Applied Chemistry 47 #1 (2010)

11/27/2009

Composition effects on ethylene/propylene copolymers studied by GPC-MALS and GPC-IR
(42-49)  European Polymer Journal 46  #1 (2010)

11/27/2009

Separation of propene/1-alkene and ethylene/1-alkene copolymers by high-temperature adsorption liquid chromatography
(5443-5448)  Polymer 50 #23 (2009)

11/27/2009

The use of SSA fractionation to detect changes in the molecular structure of model ethylene–butene copolymers modified by peroxide crosslinking
(1639-1645) Polymer Degradation and Stability 94 #10 (2009)

Crosslinked Polyethylene

12/15/2009

7,632,574
Method of cross-linking a filled polymer based on polyethylene

12/4/2009

Effect of silane-grafting on water tree resistance of XLPE cable insulation 
(p 3168-3176) Journal of Applied Polymer  Science 115 #6 (2010)
Abstract

11/27/2009

Kinetics and dynamics of thermally-induced shape-memory behavior of crosslinked short-chain branched polyethylenes
(5490-5498)  Polymer 50 #23 (2009)

Crystallization

12/4/2009

Influence of branching on the thermal and crystallization behavior of bimodal polyethylenes synthesized with binary late-transition-metal catalyst combinations 
(p 3045-3055) Journal of Applied Polymer  Science 115 #5 (2010)
Abstract

Degradation

11/27/2009

XPS and XAES of polyethylenes aided by line shape analysis: The effect of electron irradiation
(1714-1721) Polymer Degradation and Stability 94 #10 (2009)

Film

12/15/2009

7,632,907
Polyethylene film having improved mechanical and barrier properties and method of making same

12/4/2009

Vapor Phase Epitaxy of Perylo[1,12-b,c,d]thiophene on Highly Oriented Polyethylene Thin Films
(9321–9324) Macromolecules 42 #23 (2009)

Foams

12/4/2009

COMPRESSION MOLDING OF POLYETHYLENE FOAMS UNDER A TEMPERATURE GRADIENT: MORPHOLOGY AND FLEXURAL MODULUS
(237-248)
Cellular Polymers 28  #4 (2009)

12/4/2009

Postconsumer high-density polyethylene/agave fiber foamed composites coated with chitosan for the removal of heavy metals 
(p 2971-2980) Journal of Applied Polymer  Science 115 #5 (2010)
Abstract

Grafting

12/4/2009

Two-stage grafting onto polyethylene fiber by radiation-induced graft polymerization and atom transfer radical polymerization 
(p 3369-3375) Journal of Applied Polymer  Science 115 #6 (2010)
Abstract

HDPE

12/4/2009

Thermal-induced percolation in high-density polyethylene/carbon black composites
(6350-6356) Polymer 50 #26 (2009)

11/27/2009

Synthesis and kinetics of non-isothermal degradation of amide grafted high density polyethylene
(1860-1866) Polymer Degradation and Stability 94 #10 (2009)

11/27/2009

Polymer Network Mobility and Environmental Stress Cracking Resistance of High Density Polyethylene
(1252 – 1261) Polymer - Plastics Technology and Engineering 48 #12 (2009)

11/27/2009

STORAGE STABILITY OF ULTRAVIOLET IRRADIATED HDPE
(303-307)
Polymers and Polymer Composites 16 #5 (2008)

11/27/2009

MODELING THE EFFECT OF STRAIN RATE ON THE MECHANICAL PROPERTIES OF HDPE/CLAY NANOCOMPOSITE FOAMS
(561-575)
Polymers and Polymer Composites 16 #8 (2008)

LDPE

12/4/2009

STRUCTURAL CHARACTERIZATION AND MECHANICAL BEHAVIOUR OF LDPE STRUCTURAL FOAMS. A COMPARISON WITH CONVENTIONAL FOAMS
(289-302)
Cellular Polymers 28  #4 (2009)

12/4/2009

Synthesis and characterizations of calcium di(meth)acrylate divinyl monomers and melt surface graft functionalization with linear low density poly(ethylene) 
(p 2582-2590) Journal of Applied Polymer  Science 115 #5 (2010)
Abstract

11/27/2009

EFFECT OF CLAY MODIFICATION ON PHOTO-OXIDATION OF POLYETHYLENE/CLAY NANOCOMPOSITES
(535-546)
Polymers and Polymer Composites 16 #8 (2008)

11/27/2009

BLENDING TECHNIQUES AFFECTING MECHANICAL AND MORPHOLOGICAL PROPERTIES BY FLY ASH/LDPE AND CACO"3/LDPE COMPOSITES
(281-290)
Polymers and Polymer Composites 17 #5 (2009)

LLDPE

11/24/2009

7,622,529
Polymer blends from interpolymers of ethylene/alpha-olefin with improved compatibility

11/24/2009

7,622,179
Three dimensional random looped structures made from interpolymers of ethylene/.alpha.-olefins and uses thereof

Nanocomposites

12/8/2009

7,629,406
Use of organoclay in HDPE nanocomposites to provide barrier properties in containers and film

12/4/2009

Preparation and properties of chlorosulfonated polyethylene/organomontmorillonite nanocomposites 
(p 3365-3368) Journal of Applied Polymer  Science 115 #6 (2010)
Abstract  

12/4/2009

Low percolation threshold and high conductivity in carbon black filled polyethylene and polypropylene composites 
(p 3527-3534) Journal of Applied Polymer  Science 115 #6 (2010)
Abstract

11/27/2009

Effect of PEgMA/amine silane compatibilizer on clay dispersion of polyethylene-clay nanocomposites
(921-933) Polymer Bulletin 63 #6 (2009)

11/27/2009

Nonisothermal crystallization kinetics of high-density polyethylene/barium sulfate nanocomposites 
(p 2342-2349) Polymer  Engineering &  Science 49 #12 (2009)
Abstract

Polymerization

12/1/2009

7,625,982
Multimodal polyethylene compositions and pipe made from same

11/24/2009

7,622,536
Apparatus and method for the production of polyethylene and ethylene copolymers

12/4/2009

Synthesis of Supported Nickel Diimine Catalysts for Ethylene Slurry Polymerization 
(p 1979-1988) Macromolecular Chemistry and Physics 210 #22 (2009)
Abstract  

11/27/2009

Influence of Silica Support Size on the Polymerisation of Ethylene Using a Supported Metallocene Catalyst 
(p 45-51) Macromolecular Symposia 285 #1 (2009)
Abstract

11/27/2009

Gas-Phase Polymerization with Transition Metal Catalysts Supported on Montmorillonite - A Particle Morphological Study 
(p 64-73) Macromolecular Symposia 285 #1 (2009)
Abstract

11/27/2009

CRYSTAF Analysis of Polyethylene Synthesized with Phillips Catalyst 
(p 74-80) Macromolecular Symposia 285 #1 (2009)
Abstract

11/27/2009

Heterogeneous Copolymerization of Ethylene and alpha-olefins Using Aluminohydride-Zirconocene/SiO2/MAO by High-Throughput Screening 
(p 90-100) Macromolecular Symposia 285 #1 (2009)
Abstract

11/27/2009

Influence of Metallocene Type on the Order of Ethylene Polymerization and Catalyst Deactivation Rate in a Solution Reactor 
(p 101-114) Macromolecular Symposia 285 #1 (2009)
Abstract

Recycling

11/27/2009

Catalytic cracking of polyethylene waste in horizontal tube reactor
(1678-1683Polymer Degradation and Stability 94 #10 (2009)

Solutions

11/27/2009

The Modified Sanchez−Lacombe Equation of State Applied to Polydisperse Polyethylene Solutions
(10664–10681)  Industrial & Engineering Chemistry Research 48 #23 (2009)

UHMWPE

12/1/2009

7,624,694
Resilient device

11/27/2009

On the morphology of some irradiated ultra high molecular weight polyethylenes
(1621-1631) Polymer Degradation and Stability 94 #10 (2009)

11/27/2009

Single-walled carbon nanotube/ultrahigh-molecular-weight polyethylene composites with percolation at low nanotube contents 
(p 2440-2446) Polymer  Engineering &  Science 49 #12 (2009)
Abstract

11/27/2009

Rheological properties of UHMWPE/iPP blends 
(p 1121-1126) Polymers for Advanced Technologies 20 #12 (2009)
Abstract

Waxes

11/24/2009

7,622,031
Method for preparing oxidized polyolefin waxes

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

World Patents

12/17/2009

Polyethylene (PE) (HDPE; LDPE; LLDPE; MDPE; UHMWPE)

(WO 2009/151129) RUBBER MOLDED ARTICLE FOR CONTAINER FOR EXTREMELY-LOW-TEMPERATURE STORAGE AND PHARMACEUTICAL/MEDICAL CONTAINER USING THE SAME 17.12.2009 B65D 39/04 PCT/JP2009/060810 DAIKYO SEIK

(WO 2009/149608) A HIGH DENSITY POLYETHYLENE RAILWAY SLEEPER 17.12.2009 E01B 3/44 PCT/CN2008/072502 PAN, Chengca

(WO 2009/151063) COVERED WIRE FOR WIRING HARNESS AND WIRING HARNESS PRODUCED BY USING THE SAME 17.12.2009 H01B 7/00 PCT/JP2009/060557 YAZAKI CORPORATION

12/20/2009

Polyethylene (PE) (HDPE; LDPE; LLDPE; MDPE; UHMWPE)

(WO 2009/148239) MICROPOROUS POLYOLEFIN MULTILAYER FILM AND PREPARING METHOD THEREOF 10.12.2009 B29C 55/02 PCT/KR2009/002885 SK ENERGY CO., LTD.

(WO 2009/148048) SKIN-COVERING SHEET FOR IMPREGNATION WITH COSMETIC PREPARATION AND FACE MASK 10.12.2009 A45D 44/22 PCT/JP2009/060053 DAIWABO HOLDINGS CO., LTD.

12/03/2009

Polyethylene (PE) (HDPE; LDPE; LLDPE; MDPE; UHMWPE)

(WO 2009/145436) CABLE SUPPORTING HIGH WATER CROSSLINKING TEMPERATURES AND STRIPPABILITY 03.12.2009 H01B 3/00 PCT/KR2009/001607 LS CABLE LTD

(WO 2009/144891) ACRYLIC PRESSURE-SENSITIVE ADHESIVE TAPE OR SHEET 03.12.2009 C09J 7/00 PCT/JP2009/002219 NITTO DENKO CORPORATION

11/26/2009

Polyethylene (PE) (HDPE; LDPE; LLDPE; MDPE; UHMWPE)

(WO 2009/141273) EXTRUSION COATING POLYETHYLENE COMPOSITION 26.11.2009 C08L 23/06 PCT/EP2009/055897 BOREALIS TECHNOLOGY OY

(WO 2009/141227) ROTOLINED ARTICLES. 26.11.2009 B05D 7/16 PCT/EP2009/055454 TOTAL PETROCHEMICALS RESEARCH FELUY

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

US Patent Application

12/17/2009

Polyethylene (PE) (HDPE; LDPE; LLDPE; MDPE; UHMWPE)

20090312462 POLYMERIC FILMS

20090311504 MICROPOROUS MATERIALS AND MULTI-LAYER ARTICLES PREPARED THEREFROM

20090311453 Molding compostion comprsing polyethlene for preparing films and process for preparing the molding composition in the presence of a mixed catalyst

20090308009 Composite Material Roofing Structure

20090308789 RADIATION PROCESSING OF HEAVY OILS

12/10/2009

Polyethylene (PE) (HDPE; LDPE; LLDPE; MDPE; UHMWPE)

20090306319 Highly Organized Polyolefin Structures

20090306709 SURGICAL REPAIR PRODUCT COMPRISING UHMWPE FILAMENTS

20090306299 Multimodal polyethylene composition, mixed catalyst and process for preparing the composition

20090305127 MICROPOROUS MATERIAL AND A METHOD OF MAKING SAME

20090304999 CORRUGATED PACKAGING AND INSULATION MATERIAL 11 20090304966 Bimodal polyethylene process and products

20090304959 POLYPOUCH FOR PACKAGING OF SUPERIOR KEROSENE OIL

20090304857 CHEWING GUM COMPRISING POLYETHYLENE

20090301424 STARTER PULL CORDS FOR INTERNAL COMBUSTION ENGINES

20090302494 METHOD MANUFACTURE OF WEATHERSTRIPS USING ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE ONTO SCF EXTRUSION SYSTEM

12/03/2009

Polyethylene (PE) (HDPE; LDPE; LLDPE; MDPE; UHMWPE)

20090297814 Innerliner With Cross-Linked Eva

20090298981 Polyacetal Resin Composition, Process for Producing the Same, and Sliding Member Molded from the Resin Composition

20090297857 ADHESIVE COMPOSITION BASED ON ETHYLENE COPOLYMERS, USEFUL FOR EXTRUSION-COATING AND EXTRUSION-LAMINATION ON A VARIETY OF SUPPORTS

\20090297817 Sealant on polyethylene zipper for polypropylene film substrates

20090297810 Polyethylene Films and Process for Production Thereof

20090297793 Article of manufacture for providing a method of a grippable lace or cord

20090297750 POLYAMIDE-BASED MULTILAYER TUBE FOR TRANSFERRING FLUIDS

11/26/2009

Polyethylene (PE) (HDPE; LDPE; LLDPE; MDPE; UHMWPE)

20090292087 Olefin polymerization process

20090292055 NANOCOMPOSITES COMPLIANT WITH REGULATORY REQUIREMENTS

20090291273 Removable Border Ornamentation for Dinnerware and the Like

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx