Maro Publications

UHMWPE Implants


From 03/19/2014  
to 4/25/2012

Maro Topics

UHMWPE Implants: Patent Abstracts

UHMWPE Implants: Patent Titles


Ultrahigh Molecular Weight Polyethylene (UHMWPE)




“Various polymer systems have been used for the preparation of artificial prostheses for biomedical use, particularly orthopedic applications. Among them, ultra-high molecular weight polyethylene is widely used for articulation surfaces in artificial knee, hip, and other joint replacements. Ultra-high molecular weight polyethylene (UHMWPE) has been defined as those linear polyethylenes which have a relative viscosity of 2.3 or greater at a solution concentration of 0.05% at C. in decahydronaphthalene. The nominal weight--average molecular weight is at least 400,000 and up to 10,000,000 and usually from three to six million. The manufacturing process begins with the polymer being supplied as fine powder which is consolidated into various forms, such as rods and slabs, using ram extrusion or compression molding. Afterwards, the consolidated rods or slabs are machined into the final shape of the orthopedic implant components. Alternatively, the component can be produced by compression molding of the UHMWPE resin powder.” [He et al, US Patent 8,133,436 (3/13/2012)]


In this day of overworked technical people, keeping up is nearly impossible.  Maro's mission is to help keep up in as little time as possible.  Bookmark this page and check it often.  You will be surprised what can be picked up in just a few moments spent each day.

These pages list the links as they are found.  Some will abstracted and added to Maro Topics. (RDC 2/7/2012)


Roger D. Corneliussen

Maro Polymer Links
Tel: 610 363 9920
Fax: 610 363 9921


Copyright 2012 by Roger D. Corneliussen.
No part of this transmission is to be duplicated in any manner or forwarded by electronic mail without the express written permission of Roger D. Corneliussen

* Date of latest addition; date of first entry is 4/25/2012.

Hit Counter